Dessin M001 Natural Aluminium 
One side with aluminium lamination, white 1603 MT on back, one side with protective film.
Both sides with aluminium lamination, both sides with protective film.

Dessin M002 Top Matt Aluminium 
One side with aluminium lamination, white 1603 MT on back, protective film on one side.

Dessin M003 Aluminium Stainless Steel Tone 
One side with aluminium lamination, white 1603 MT on back, one side with protective film.
Both sides with aluminium lamination, both sides with protective film.

Processing:
Please refer to our "Technical Information 9" for FunderMax Metal Panels available under DOWNLOADS menu.

Areas of application:
Kitchen, bathroom, and designer furniture, high-quality shopfitting and interior design and modern trade fair booth construction.
Suitable for decorative applications. Not suitable for high-wear areas.

Product Info:
During the manufacture of aluminium direct laminates it is possible that slight surface marking and indentations occur. These defects are unavoidable and considered completely normal.
Slight variations in colour are also to be expected. Differences in surface finish and colour do not affect the quality of the materials, they are proof of the fact that these are real metal surfaces.

Split panels along film seam and arrange elements according to colour.
Please take note of the direction arrows on the protective foil.

Details:

Format:
2790 x 1840 mm
only whole formats available (no cutting service).

Note:
film with longitudinal seam on width 1230 / 610 mm (join max. 5 mm)

Standard final thickness: 19 mm

Special thickness - Minimum quantity:
in standard thickness from 8 mm to 38 mm
Thickness ≤ 25 mm - from 2 pieces (among with surchage)
Thickness ≥ 28 mm - 14 pieces (or multiple thereof)

Thickness tolerance:
Thickness ≤ 20 mm ± 0.5 mm
Thickness ≥ 20 mm + 0.5 / - 1.0 mm